1300 088 033

To Set Time and Date: Commander NT - Setting Time and Date

Programming Overlay:

When you begin programming, a group of keys on the keystation become the keys for moving through programming headings and settings. The programming overlay is a paper cutout that shows what the four keys do during programming.

Placing the programming overlay:

Begin the programming session:

Display will show .

1. Press	Feature:
2. Press * * 2 6 6 3. 4 . 4..	Password: RETRY
3. Press 2 3 6 4 6.
4. Press Next five times	Time&Date
4. Press Show .	Hour:01 NEXT CHANGE
5. Press dial key pad to enter the hour	Hour:__ CANCL
6. This will display if you have enter number less than 12	AM OK CHANGE
7. Press NEXT	Hour:13 NEXT CHANGE
8. Press CHANGE	Minutes: 00 NEXT CHANGE
9. Press dial keys to enter minutes	Minutes: __ CANCL
10. Press NEXT	Minutes: 30 NEXT CHANGE
11. Press CHANGE	YEAR: 99 NEXT CHANGE
12. Press dial keys to enter year	YEAR: __ CANCL
13. Press NEXT	Months: 01 NEXT CHANGE
14. Press CHANGE	Months: __ CANCEL
15. Press Dial keys to enter month	Months: __ CANCEL
16. Press NEXT	Day:01 NEXT CHANGE
17. Press CHANGE	Day: __ CANCEL
18. Press Dial keys to enter day	Day:15 NEXT CHANGE
19. Press to end your session	End of session